Differences between current version and predecessor to the previous major change of ServicingTheRotosonicDrum.

Other diffs: Previous Revision, Previous Author

Newer page: version 9 Last edited on February 6, 2007 7:39 am. by
Older page: version 4 Last edited on January 31, 2007 2:49 pm. by
@@ -1,5 +1,5 @@
-On Leslie [205|Leslie205], [610|Leslie610], [710|Leslie710], [722|Leslie722], [822|Leslie822]; perhaps others..., you find a RotosonicDrum. If it's necessary to take this drum out, perform the following steps: 
+Several [ Leslie] models (including the [205|Leslie205], [610|Leslie610], [710|Leslie710], [722|Leslie722], [822|Leslie822], and perhaps others) feature a RotosonicDrum. If it's necessary to take this drum out, perform the following steps~ : 
 # Remove the 15" speaker. 
 # Pull out the [Mercotac] rotating contact on top of the drum shaft. 
 # Loose the srew of the upper bearing assemby and pull it off the shaft. Due to the rubber grommet you need some force. 
 # Loose the four screws of the wood base and take it out. Now you see the top of the RotosonicDrum. 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.