Note: You are viewing an old revision of this page. View the current version.

Support HammondWiki. Donate!
PayPal

http://www.dairiki.org/hammond/pics/rok1.jpg http://www.dairiki.org/hammond/pics/rok2.jpg

Roll-Or-Kari's are a brand of organ dollies. The come in pairs, and are designed to be strapped on to the organ, one on each end. They have wheels which jack down (the Roll part), and very comfortable flip up handles (Kari). Once you have used a set, you will not want to move an organ without them ever again.

They come in several models. The bottom bar is available in (at least) two widths. If you plan on moving any B-Type Organ you'll need the wide version, since the narrow one will not span the legs. You can also get models with swiveling (steerable) wheels on either one or both sides.

Roll-Or-Karis are manufactured by:

 Enrick Co.
 http://www.enrickco.com/

 P.O. Box 37
 Zumbrota, MN 55992
 Ph: 507-732-5215, 1-800-959-0354
 Fax: 507-625-6570

Your HammondTechnician probably sells them also see PartsSources. To find a local source, look in the Yellow pages under "Casters". (Drake & McDonald, carries them in Seattle.) (Also, see http://www.nortechusa.com/rollorkr.htm.)

Some equipment rental houses have them. Usually asking for "Roll-Or-Karis", though, will get you nowhere --- try asking for organ dollies.

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.