Differences between version 7 and previous revision of LeslieBearings.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 7 Last edited on January 6, 2019 11:47 am. by
Older page: version 6 Last edited on February 25, 2005 8:17 am. by
@@ -1,7 +1,9 @@
 The lower bearing might be a ''[NTN # 6200 LB|http://www.ntnamerica.com/products/datasheet.asp?CO_PARTNOSEARCHTYPE=EXACT&CO_PARTNO=6200lb&MANUFACTURER=NTN&CL_PARTNO=6200LB&BEARINGCATEGORY=RBSRD]'' (Also: ''Fafnir 200PP'') 
 (McMasterCarr 5972K41 ?) (10mm bore, 30mm diameter, 9mm thick, two seals). 
+  
+The lower rotor bearing should include a 5/16 washer in between the wooden rotor and the bearing.  
  
 The upper bearing: ''MRC 35FF'' (5mm bore, 19mm diameter, 6mm thick, two shields). 
  
 On a [Leslie710], you can replace both bearings with ball bearings from FAG. Type 6200.2RSR. Ball bearings are standardized industry parts, so a second source type is no problem at all. 
 - Steffan Diedrichsen - 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.