Differences between version 11 and previous revision of Leslie122Hookup.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 11 Last edited on November 13, 2009 11:06 am. by
Older page: version 10 Last edited on January 31, 2007 2:55 pm. by
@@ -59,11 +59,8 @@
 ------ 
 !Transformer-less Leslie Kit 
  
 As described above, the stock [LeslieHookupKit]s use an isolation transformer to isolate the [G-G] outputs from the common-mode DC control voltage. One can, of course, use capacitors instead. 
-BradBaker has a schematic detailing how one might do this at:  
-  
- http://www.arcanedevices.com/hammond/adapter_ckt/les_sw_ckt.gif.  
  
 MikeFulk says the addition of two 0.02 uF capacitors to ground from either leg of the signal path _after_ the 10 uF NP caps is absolutely necessary to the quiet and balanced operation of the circut, and will engender its working perfectly. 
  
 There will be no perceptible degredation of the sound, says Mike Fulk. 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.