Differences between current version and predecessor to the previous major change of EliminatingThePercussionVolumeDrop.

Other diffs: Previous Revision, Previous Author

Newer page: version 14 Last edited on September 28, 2011 11:43 pm. by
Older page: version 13 Last edited on August 11, 2011 7:41 pm. by EliminatingThePercussionVolumeDrop
@@ -18,8 +18,10 @@
 Luckily you can test this mod out __Before__ you permanently alter your organ. 
 For a pictorial version of this mod on an M3 see [PercussionVolumeDropM3]. 
+First you need to get at the matching transformer. Its inside the aluminum enclosure under the lower manual drawbars, above the tone wheel cover on the right.  
 Remove the two screws securing the cover, and notice a group of resistors mounted on a strip on the left side of the matching 
 transformers. The resistor to jumper out is the lowest one on the left (in a B/C-3, this is R1 (3.9Meg), in an M-3, it's R2 (1Meg)). 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.