HammondWiki - Diff: Addition Of Polyphonic Percussion For 2nd, 3rd, 4th, 5th and 6th Harmonics

Differences between version 2 and previous revision of Addition Of Polyphonic Percussion For 2nd, 3rd, 4th, 5th and 6th Harmonics.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 2 Last edited on March 29, 2014 8:52 am. by
Older page: version 1 Last edited on March 27, 2014 7:50 am. by
@@ -76,14 +76,17 @@
 </verbatim> 
  
 Solder all of the wires routed to the five toggle switches per the above schematic. Also solder all the remaining “jumpers” shown on the schematic. These “jumpers can all be soldered locally at the five switches. 
  
+Here’s a picture showing the installation of the five harmonic selectors switches under the front rail. The percussion switches are on the right.  
  
-<br>  
+[http://www.dairiki.org/hammond/pics/mihevic/Perc10576s800.jpg]  
+  
+----  
  
 __THEORY OF OPERATION__<br> 
  
 The function of the toggle switch contacts is as follows: 
 The “1” set of contacts selects the appropriate harmonic from the drawbar or terminal strip wire and routes it to the “H” (percussion input on AO-28) terminal. The “2” set of contacts are wired in series to isolate “HW” from terminal “H” anytime a harmonic is selected. The “3” set of contacts on S2 and S3 isolates the 2nd and 3rd harmonic from the console selector rocker tablet so there is no interaction between the 2nd and 3rd harmonic. 
  
  
 !—JohnMihevic 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.