Differences between version 4 and predecessor to the previous major change of AO-29 EM To PM Conversion.

Other diffs: Previous Revision, Previous Author

Newer page: version 4 Last edited on February 27, 2016 1:35 pm. by
Older page: version 3 Last edited on January 24, 2007 7:40 am. by
@@ -8,8 +8,16 @@
  
 *WARNING, WARNING*: 
  MikeFulk and others have warned that these instructions are not correct or complete. 
  <br> *Do not use these instructions without understanding completely what it is that you are doing!* 
+  
+*WARNING, WARNING* Indeed:  
+ MikeFulk is correct. This is missing two important steps:  
+  
+# Replace the power transformer with one from a PM AO-29  
+# Replace the output transformer with one from a PM AO-29  
+  
+The field-coil version of the AO-29 uses a 380V power transformer, whereas the permanent-magnet version uses a 320V power transformer. If you follow the steps below, all the voltages throughout the amplifier will be too high, and something will fry.  
  
  
 > First, get a copy of the M3 ServiceManual. The parts diagram is essential 
 > (unless you are really good at reading schematics). You are basically 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.