Note: You are viewing an old revision of this page. View the current version.

Support HammondWiki. Donate!
PayPal

Quick test of AO-28 output level.

From GeorgeBenton:

For a quick test I usually pull out the first four drawbars and press down key 25 (the C two octaves above the lowest C). I look for an AC rms voltage measured at the G-G terminals of around 2 volts, minimum --- higher levels, more like four volts RMS are more normal. (This test is presumably performed with the expression pedal "floored".)

SalAzz adds:

2 VAC RMS is low. ~4 to 6.5 volts P-P, or 3 to 5 volts RMS is more like it. The output of the consoles do vary considerably.

TopicTroubleshooting

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.