HammondWiki - Diff: MicrophonicTubes

Differences between version 3 and previous revision of MicrophonicTubes.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 3 Last edited on July 15, 2004 4:04 pm. by
Older page: version 2 Last edited on February 16, 2003 2:46 pm. by
@@ -3,9 +3,11 @@
  
 If you lightly tap on a microphonic, while your organ and/or amp is on, 
 you'll probably be able to hear noises coming from your speaker. 
  
-Microphonic tubes can often a cause of feedback, buzzing noise, distortion 
-or other bad sounds. If you find one, you should replace it. 
+Microphonic tubes can often be a cause of feedback, buzzing noise, distortion 
+or other bad sounds. If you find one, you should replace it. If you can tap time on your organ case and hear the taps in the speaker, you need to start hunting the mic.  
+  
+Hammonds can become microphonic in other ways too.. the expression pedal works a capacitor which can become a capacitive microphone if the blocking cap leaks tube plate voltage onto it. If the microphone seems to be inside the transformer can beside the preset bars, the transformer core can take a permanent magnetism and become a dynamic mic.. degauss the transformer. [Can2Can]  
  
 ----- 
 TopicTroubleshooting 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.