Differences between current version and previous revision of HowToRaiseTheManuals.

Other diffs: Previous Major Revision, Previous Author

Newer page: version 5 Last edited on March 22, 2019 6:15 pm. by
Older page: version 4 Last edited on January 21, 2018 3:57 pm. by
@@ -12,13 +12,13 @@
 # Now, from the front you should be able to lift front side of the upper manual. Have some small wood blocks handy to prop the manual up with. 
  
 __Lower Manual__ 
  
-# Remove music desk base. 
+# Remove music desk base (4 screws and washers .)  
 # Remove all four of the big hex-head bolts. 
 # Remove two screws which connect the front of the lower manual to the middle of the front rail of the case. (Some A-1xx's (A-102's ?) have additional little clippys which secure the lower manual to the front rail --- for these just loosen the screws enough so that you can swivel the clips out of the way.) 
 # Pull the drawbars out (to 8). 
 # Make sure you've got something between the manuals and the case to protect the case from scratches (see above warning). 
 # Now you should be able to lift the manuals from the front. 
  
 ------- 
 Also see HowToRemoveTheManuals. 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.