Differences between current version and predecessor to the previous major change of HowToRaiseTheManuals.

Other diffs: Previous Revision, Previous Author

Newer page: version 4 Last edited on January 21, 2018 3:57 pm. by 24.47.226.180
Older page: version 2 Last edited on August 31, 2007 7:41 am. by JeffDairiki
@@ -1,7 +1,7 @@
 ! Raising the Manuals 
  
-__Warning:__ To protect the organ case from scratches, you should get some heavy paper, or light cardboard, and insert it between the ends of the manuals and the organ case. Do this __before__ you even think about moving the drawbar base or the manuals. ([Trek] makes dedicated scratch protectors for this purpose --- if you plan on doing this sort of thing more than once, they are highly recommended. See http://www. trekii.com/CSP1 .html.) 
+__Warning:__ To protect the organ case from scratches, you should get some heavy paper, or light cardboard, and insert it between the ends of the manuals and the organ case. Do this __before__ you even think about moving the drawbar base or the manuals. ([Trek] makes dedicated scratch protectors for this purpose --- if you plan on doing this sort of thing more than once, they are highly recommended. See http://trekii.com/products/all/csp-1 .html .) 
  
 __Upper Manual__ 
  
 # Remove the (wooden) music desk base. Generally there are four screws holding this on. (On an [A-100], the whole top of the case comes off --- there are two additional screws under the back edge which need to be removed.) 

The content of this page is Copyright (C) 2000, 2001, 2002 Geoffrey T. Dairiki and the other authors of the content, whoever they may be.
This is free information and you are welcome redistribute it under certain conditions; see http://www.dairiki.org/HammondWiki/opl.html for details.
Absolutely no warrantee is made as to the correctness of the information on this page.